Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
1. Disconnect and isolate the battery negative cable. Wait two minutes for the system capacitor to discharge before further service.
2. Remove the scuff plate trim from the right or left front door opening sill (5).
3. Lift the floor carpet upward from the sill far enough to access the side impact sensor on the floor panel (4) below the right or left outboard front
seat adjuster riser.
4. Remove the two screws (2) that secure the side impact sensor (3) to the floor panel.
5. Disconnect the body wire harness connector (1) from the sensor connector receptacle.
6. Remove the sensor from the floor panel.