Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
1. Turn the ignition switch to the Off position. Be certain that all electrical accessories are turned off.
2. Disconnect and isolate the battery negative cable.
3. Loosen the band clamp (2) on the air inlet tube (1) and remove the bolts (3) from the air intake resonator (4). Remove the resonator from the
vehicle.
4. Disconnect the battery positive cable terminal clamp (8).
5. Remove the nut (5) securing the cable to the Integrated Power Module (IPM) (7) stud (6).
6. Lift the terminal cap and remove the nut (3) securing the cable (4) to the alternator.
7. Disconnect the starter solenoid wire harness connector (1).