Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
4. Install the cable pushpin (5) into the left frame rail (4).
5. Connect the starter solenoid wire harness connector (1).
6. Raise the vehicle on a hoist.
7. Install the nut (2) securing the cable (1) to the starter solenoid (3). Tighten the nut to 13 Nm (115 in. lbs.).
8. Connect the battery cable retaining pushpin (6) securing the cable to the engine block.
9. Lower the vehicle.
10. Connect the battery positive cable terminal clamp (8). Tighten the battery terminal clamp pinch-bolt hex nut to 5 Nm (45 in. Lbs.).