Dakota Quad Cab 2WD V6-3.9L VIN X (2002)
Controller Antilock Brake: Service and Repair
Rear Wheel Antilock System
REMOVAL
NOTE: If the CAB needs to be replaced, the rear axle type and tire revolutions per mile must be programed into the new CAB. To program the CAB
refer to the Chassis Diagnostic.
1. Disconnect battery negative cable.
Fig.5 Harness Connector Locks
2. Release the CAB harness connector locks, and remove the harness connectors from the CAB.
Fig.6 Pump Motor Connector
3. Disconnect the pump motor connector.