Dakota Quad Cab 2WD V6-3.9L VIN X (2002)
inside of fuel tank.
1. 2 Door Models:
a. Position sending unit into tracks. Note wire routing.
b. Push unit on tracks until lock tab snaps into notch.
c. Connect 2 sending unit wires into 4-way connector and install locking collar.
d. Connect 4-way electrical connector to module.
2. 4 Door Models:
a. Position sending unit to pump module and snap into place.
b. Connect electrical connector to terminals.
3. Install fuel pump module. Refer to Fuel Pump Module Removal/Installation.
4. Install fuel tank. Refer to Fuel Tank Removal/Installation.