Dakota Quad Cab 2WD V8-4.7L VIN N (2001)
EQUIPMENT REQUIRED:
REPAIR PROCEDURE:
THIS REPAIR IS COMPATIBLE WITH DAIMLERCHRYSLER'S MOBILE SERVICE PROGRAM AND DOES NOT REQUIRE HOISTS OR
OTHER FULL SERVICE FACILITY SPECIAL EQUIPMENT.
NOTE:
ONCE THE ANTILOCK BRAKE CONTROL MODULE (CAB) IS REPLACED, THE REAR AXLE TYPE AND TIRE SIZE MUST BE
PROGRAMED INTO THE NEW CAB.
1.
Disconnect battery negative cable.
2.
Push the harness connector locks to release the locks, (Fig. 1) then remove the connectors from the CAB.
