Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
Piston Dust Boot Installation
8. Seat dust boot in caliper with Installer Tool C-4842 and Tool Handle C-4171.
9. Replace caliper bleed screw if removed.
INSTALLATION
1. Install brake shoes in caliper.
2. Install caliper and shoes over rotor and into ledges in steering knuckle. Be sure ends of brake shoes are properly seated on slide surfaces of ledges.
3. Install and tighten caliper slide pins to 30 Nm (22 ft. lbs.). Start the slide pins by hand before tightening. Do not cross thread the pins.