Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
Engine Mount: Service and Repair
Front Mount
FRONT MOUNT REMOVAL
2WD
1. Disconnect the negative cable from the battery.
2. Raise hood and position fan to assure clearance for radiator top tank and hose.
CAUTION: DO NOT lift the engine by the intake manifold.
3. Install engine lifting fixture.
4. Raise vehicle on hoist.
5. Remove the insulator through bolt (Fig. 46) (Fig. 47).
6. Raise engine with lifting fixture SLIGHTLY. Remove insulator retaining bolts and remove the insulator assembly.
7. Remove insulator heat shield and transfer to new insulator.