Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
6. Reach through the radio opening in the instrument panel to access and reconnect the instrument panel wire harness connector for the passenger air-
bag to the passenger airbag pigtail wire connector. Be certain that the passenger airbag pigtail wire connector is fully engaged with and latched to
the instrument panel wire harness connector.
7. Engage the passenger airbag pigtail wire connector retainers in the mounting holes provided on the instrument panel armature.
8. Reinstall the radio into the instrument panel (Refer to AUDIO/RADIO - INSTALLATION).
9. Reinstall the glove box module onto the instrument panel.
10. Do not reconnect the battery negative cable at this time. The airbag system verification test procedure should be performed following service of
any airbag system component. (Refer to RESTRAINTS - STANDARD PROCEDURE - VERIFICATION TEST)