Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
Band Apply Servo: Service and Repair
Rear Servo
46RE - Automatic Transmission
REAR SERVO - DISASSEMBLY
1. Remove small snap-ring and remove plug and spring from servo piston (Fig. 234).
2. Remove and discard servo piston seal ring.
CLEANING
Remove and discard the servo piston seal ring (Fig. 235).
Then clean the servo components with solvent and dry with compressed air. Replace either spring if collapsed, distorted or broken. Replace the plug and
piston if cracked, bent, or worn. Discard the servo snap-rings and use new ones at assembly.