Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
10. Install and position nine clutch piston springs (Fig. 99).
11. Install spring retainer on top of piston springs.
12. Compress spring retainer and piston springs with Tool C-3863-A.
13. Install spring retainer snap-ring and remove compressor tool.
14. Install clutch plates and discs (Fig. 96). Three clutch discs, three steel plates and one reaction plate are required.
15. Install reaction plate followed by waved snap-ring.
16. Check clutch pack clearance with feeler gauge (Fig. 100). Clearance between waved spring and pressure plate should 1.78 - 3.28 mm (0.070 -
0.129 inch). If clearance is incorrect, clutch plates, clutch discs, snap-ring, or pressure plate may have to be changed.