Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
![background image](/dodge/dakota_quad_cab_2wd/v8-5.9l_vin_z_ldc/Page-1357001.png)
Seals and Gaskets: Service and Repair
46RE - Automatic Transmission
Extension Housing Seal / REMOVAL
1. Raise vehicle.
2. Mark propeller shaft and axle yoke for alignment reference.
3. Disconnect and remove propeller shaft.
4. Remove old seal with Seal Remover C-3985-B (Fig. 88) from overdrive housing.
INSTALLATION
1. Place seal in position on overdrive housing.
2. Drive seal into overdrive housing with Seal Installer C-3995-A (Fig. 89).
3. Carefully guide propeller shaft slip yoke into housing and onto output shaft splines. Align marks made at removal and connect propeller shaft to
rear axle pinion yoke.