Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
9. Install bolts into two of the threaded holes in the companion flange 180° apart.
10. Position Holder 6719 against the companion flange and install a bolt and washer into one of the remaining threaded holes. Tighten the bolts so that
the Holder 6719 is held to the flange.
11. Remove the pinion nut.
12. Remove the companion flange with Remover C-452 (Fig. 36).
13. Remove pinion from differential housing (Fig. 37).
14. Remove pinion seal with a pry tool or a slide hammer mounted screw.
15. Remove oil slinger, if equipped, and front pinion bearing.