Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
18. Remove collapsible preload spacer (Fig. 40).
19. Remove rear pinion bearing with Puller/Press C-293-PA and Adapters C-293-42 (Fig. 41).
20. Remove depth shims from the pinion shaft and record thickness of shims.
INSTALLATION
NOTE: The ring gear and pinion are serviced in a matched set. Never replace one gear without replacing the other. If ring and pinion gears or bearings
are replaced, refer to Adjustments for Pinion Gear Depth Setting.
1. Apply Mopar Door Ease or equivalent lubricant to outside surface of the bearing cups.