Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
21. Remove pinion depth shims (Fig. 60) from the pinion shaft and record shim thickness.
INSTALLATION
NOTE: The ring gear and pinion are serviced in a matched set. Do not one gear without replacing the matching gear. If ring and pinion gears, or
bearings are replaced, refer to Adjustments for Pinion Gear Depth Setting.
1. Apply Mopar Door Ease or stick lubricant to outside surface of pinion bearing cups.
2. Install rear pinion bearing cup (Fig. 61) with Installer C-4308 and Driver Handle C-4171 and verify cup is seated.
