Dakota Quad Cab 2WD V8-5.9L VIN Z LDC (2002)
5. Insert cage into the housing (Fig. 11). Rotate the cage 90° into the housing (Fig. 12).
6. Apply the lubricant included with the replacement boot to the ball races. Spread the lubricant equally between all the races.
7. Tilt inner race/hub and cage and install the balls (Fig. 13).
8. Place new clamps onto new boot and slide boot onto the shaft to its original position.
9. Apply the rest of lubricant to the C/V joint and boot.
