Dakota Quad Cab Overdrive Switch - Transmission Controls - Location - Page 4011
Overdrive Switch: Service and Repair
46RE - AUTOMATIC TRANSMISSION
OVERDRIVE SWITCH / REMOVAL
1. Using a plastic trim tool, remove the overdrive off switch retainer from the shift lever (Fig. 128).
2. Pull the switch outwards to release it from the connector in the lever (Fig. 129)
INSTALLATION
NOTE: There is enough slack in the wire to pull out the connector from the lever.
1. Pull the connector out of the lever just enough to grasp it.
CAUTION: Be careful not to bend the pins on the overdrive off switch. Use care when installing the switch, as it is not indexed, and can be accidentally
installed incorrectly.
