dodge Workshop Repair Guides

Dodge Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 6
background image

FIGURE 5

3.

Repeat Steps 1 and 2 until all white nylon end fittings identified in Figures 2-5 are clipped.

NOTE:

CLIPS ARE NOT REQUIRED IF THE END FITTINGS ARE COLOR CODED BLACK.

POLICY:

Reimbursable within the provisions of the warranty

TIME ALLOWANCE:
Labor Operation No.

21-35-30-90

0.3 Hrs.

FAILURE CODE:

37 - Excessive Wear

Transmission and Drivetrain > Manual Transmission/Transaxle > Shift Linkage, M/T > Shift Cable, M/T > Component Information > Technical Service Bulletins > All Technical Service Bulletins for Shift Cable: > 210586 > Mar > 86 > M/T Shifter - Loose/Inoperative > Page 3290

< PREV PAGE NEXT PAGE >