Daytona IROC R/T L4-135 2213cc 2.2L DOHC Turbo VIN A FI (1993)
Driveshaft Identification And Dimensions
3. Pry the engine right or left as required to achieve the proper drive shaft assembly length. Refer to charts for driveshaft identification and related
assembly length measuring.
4. Tighten right engine mount insulator vertical bolts to 68 Nm (50 ft. lbs.). Then tighten front engine mount screws and nuts to 54 Nm (40 ft. lbs.)
and center left engine mount insulator.
5. Recheck drive shaft length.