Daytona IROC R/T L4-135 2213cc 2.2L DOHC Turbo VIN A FI (1993)
Throttle Position Sensor: Description and Operation
LOCATION
Sensor mounted on throttle shaft.
PURPOSE
PCM uses sensor input with other inputs to determine current operating conditions.
PCM adjusts air/fuel mixture (injector pulse width) and ignition timing.
OPERATION
PCM supplies 5 volt sensor reference voltage.
Sensor is a variable resistor (potentiometer), whose resistance is dependent on the angle of the throttle blade (or throttle opening).
Output voltage ranges from approximately 0.5 Volts, (at idle position), to approximately 4 Volts, (at Wide Open Throttle). SEE
SPECIFICATIONS.