Daytona Pacifica L4-135 2.2L SOHC Turbo VIN E FI (1988)
FIGURE 1
2.
Install the hot air adapter and clamp on the air cleaner. Orientate the adaptor over the exhaust crossover pipe until the word "top" is at the top of
the air cleaner nipple. The adaptor should be located directly over the exhaust crossover pipe. Tighten the clamp to retain the adaptor.
3.
Install SMEC adaptor onto the SMEC.
4.
Install the connector assembly between the two adapters.
POLICY:
Reimbursable within the provisions of the warranty
TIME ALLOWANCE:
Labor Operation No.
14-30-02-91 . . . . . . . . . 0.2 Hrs.
FAILURE CODE:
RO - Driveability
