Durango 2WD V6-3.7L (2009)
1. Align the bulb holder and bulb (3) with the keyed opening in the circuit board of the Electronic Vehicle Information Center (EVIC) (2).
2. Insert the bulb holder and bulb straight into the circuit board until the bulb holder is firmly seated.
3. Using a small thin-bladed screwdriver, rotate the bulb holder clockwise about 30 degrees on the circuit board to lock it into place.
4. Reinstall the overhead console (1) onto the headliner. See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Overhead
Console - Installation.
5. Reconnect the battery negative cable.