Durango 2WD V6-3.7L (2009)
![background image](/dodge/durango_2wd/v6-3.7l/Page-3512001.png)
Rear Door Latch: Service and Repair
Rear Door Latch - Installation
INSTALLATION
1. Position the latch (1) into the door and connect the electrical connector (2).
2. Install the latch and the screws (5).
3. Tighten the screws to 10 Nm (7 ft. lbs.).
4. Connect the actuator rods 3 and 4.
5. Install the watershield. See: Rear Door Panel/Service and Repair/Water Shield - Installation.