Durango 2WD V6-3.7L (2009)
9. Apply primer (1) around the perimeter of the glass to a width of 15 mm (0.5 in.) (2).
10. Allow primer to air dry for at least 10 minutes.
11. Using a flash light, verify that glass primer is without damage.
Liftgate Opening Preparation
NOTE: Windshield opening shown, liftgate opening similar.
1. Clean and vacuum liftgate opening.
2. Level old bead of liftgate opening adhesive (1) to a thickness of approximately 1 mm (0.04 in.) and remove loose adhesive.