Durango 2WD V6-3.7L (2009)
Seat Heater Switch: Service and Repair
Heated Seat Switch - Installation
Front
INSTALLATION
NOTE: When installing the heated seat switches, be certain they are installed in the proper mounting holes of the heated seat switch bezel (2).
The heated seat switches are identified by a keyway in the connector receptacle on the back of each switch.
1. From the back of the heated seat switch bezel, gently push the heated seat switch in through the rear of the bezel.
2. Install the center bezel on the instrument panel See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Cluster
Bezel - Installation.
3. Connect the battery negative cable.
4. Verify heated seat system operation.
Second Row
INSTALLATION