Durango 2WD V6-3.7L (2009)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Vibration Damper - Installation
INSTALLATION
CAUTION: To prevent severe damage to the Crankshaft, Damper or Damper Installer 8512A, thoroughly clean the damper bore and the
crankshaft nose before installing Damper.
1. Position the damper onto crankshaft.
2. Assemble the damper installer 8512A (2) , and the pressing cup (1) from A/C hub installer 6871.
3. Coat the threads of damper installer 8512A with Mopar(R) Nickel Anti-Seize or equivalent.
4. Using the damper installer 8512A (1), and the pressing cup from the A/C hub installer 6871, press the damper onto crankshaft.
5. Install and tighten the vibration damper bolt to 175 Nm (130 ft. lbs.).
6. Install the cooling fan. See: Cooling System/Radiator Cooling Fan
7. Install the accessory drive beltSee: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal and
Replacement/Serpentine Accessory Drive Belt - Installation.
8. Connect the negative cable to battery.