Durango 2WD V6-3.7L (2009)
5. Position a new gasket (3) between the EGR routing tube flange and the EGR valve assembly.
6. Position the EGR routing tube (1) to the side of the EGR valve and align the end of the tube (6) into intake manifold and tighten the retainers to 11
Nm (9 ft. lbs.).
7. Connect the electrical connector (3) to the EGR valve solenoid (1).
8. Install the windshield wiper motor.
9. Install the plastic windshield cowl panel.
10. Connect the negative battery cable.
11. Using a diagnostic scan tool, erase any previously recorded DTC's (Diagnostic Trouble Codes).