Durango 2WD V6-3.7L (2009)
![background image](/dodge/durango_2wd/v6-3.7l/Page-234005.png)
TEHCM MOUNTING BOLTS
3. Install the TECHM heat sink bolts (1). Tighten the bolts to 7 Nm (62 in.lbs.).
4. Install the TECHM mounting bolts (2). Tighten the bolts to 11 Nm (97 in.lbs.).
5. Connect the 2-way TEHCM electrical connector (1).
6. Connect the TEHCM electrical connector (1) to the valve body.