Durango 2WD V8-4.7L (2008)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
TPM Transponder - Installation
Front Transponder
FRONT TRANSPONDER
1. Install the transponder (2) to the vehicle and reconnect the electrical connector.
2. Install the mounting nuts (1) for the transponder (2) Tighten to 3 Nm (25 in. lbs.).
3. Install the wheel well housing cover (2).
4. Lower the vehicle.
Rear Transponder
REAR TRANSPONDER
1. Install the transponder (2) to the vehicle and reconnect the electrical connector (3) and secure the harness to the stud (4).
2. Install the mounting nut (1) for the transponder (2). Tighten to 3 Nm (25 in. lbs.).
3. Lower the vehicle.