Durango 2WD V8-4.7L Flex Fuel (2009)
Trailer Hitch: Service and Repair
Trailer Hitch - Installation
INSTALLATION
1. Position trailer hitch on vehicle.
2. Install the bolts and nuts (2, 3 and 5) attaching trailer hitch to frame rail and tighten to 183 Nm (135 ft. lbs.).
3. Connect the trailer wiring electrical connector.
4. Install the rear body rebound cushions (2) and cab mounting bolts (3) and tighten to 81 Nm (60 ft. lbs.).
5. Install the rear bumper. See: Body and Frame/Bumper/Rear Bumper/Rear Bumper Reinforcement/Service and Repair/Rear Bumper Support -
Installation.