Durango 2WD V8-4.7L Flex Fuel (2009)
Door Module: Service and Repair
Door Module - Installation
INSTALLATION
1. Position module on door and install fasteners.
2. If applicable, first connect the black 12-way electrical connector (3), then connect the brown 20-way electrical connector (2). Then connect the
black 10-way electrical connector to the module (1).
3. Install the door trim panel See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim Panel -
Installation.
4. Connect the battery negative cable.
5. Verify system and vehicle operation.