Durango 2WD V8-4.7L Flex Fuel (2009)
Seat Heater Switch: Service and Repair
Heated Seat Switch - Removal
Front
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the center bezel (1) from the instrument panel See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Panel Bezel - Removal.
3. Remove the heated seat switch bezel and both switches from the center bezel as a unit.
4. From the back of the heated seat switch bezel (2), gently pry the switch free and push the heated seat switch out through the rear of the bezel.
Second Row
REMOVAL