Durango 2WD V8-4.7L Flex Fuel (2009)
7. Install the rotor (1) See: Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Brake Rotor - Installation.
8. Install the caliper adapter (2) See: Disc Brake Caliper Adapter - Installation.
9. Install the caliper (3) See: Disc Brake Caliper - Installation.
10. Install wheel and tire assembly.
Front
FRONT
CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to
hang the caliper securely.
1. Install prop rod on the brake pedal to keep pressure on the brake system, Holding pedal in this position will isolate master cylinder from hydraulic
brake system and will not allow brake fluid to drain out of brake fluid reservoir while brake lines are open. This will allow you to bleed out the
area of repair instead of the entire system.
2. Raise and support the vehicle.
3. Remove the tire and wheel assembly.
4. Compress the disc brake caliper (2).