Durango 2WD V8-4.7L Flex Fuel (2009)
14. Remove the two screws (1) that secure the HVAC housing retaining bracket (2) to the top of the HVAC housing (3).
15. Remove the HVAC housing retaining bracket from the HVAC housing.
16. Remove the two screws (4) that secure the heater core retaining bracket (5) to the top of the HVAC housing.
17. Carefully remove the heater core (6) from the HVAC housing.
18. Disconnect the HVAC wiring harness (1) from the blower motor (2).
19. Remove the blower motor from the HVAC housing (3).
20. Remove the evaporator temperature sensor See: Evaporator Temperature Sensor / Switch/Service and Repair/Front Evaporator Temperature
Sensor - Removal.
21. Disconnect the HVAC wiring harness (1) from the blower motor resistor or power module (2), depending on application.