Durango 2WD V8-4.7L Flex Fuel (2009)
Heated Glass Element Relay: Service and Repair
Rear Defogger Relay - Installation
INSTALLATION
NOTE: Refer to the fuse and relay map on the inside of the junction block (JB) cover for EBL relay location.
1. Position the EBL relay to the JB (1).
2. Align the EBL relay terminals with the terminal cavities in the JB receptacle and push down firmly on the relay until the terminals are fully seated.
3. Install the trim cover onto the driver side cowl (2).See: Maintenance/Fuses and Circuit Breakers/Fuse Block/Description and Operation/Junction
Block - Description.
4. Reconnect the negative battery cable.
