Durango 2WD V8-4.7L Flex Fuel (2009)
4. Remove the screw (2) that secures the lower anchor (3) to the bracket on the outboard side of the front seat cushion frame.
5. Unsnap the upper edge of the trim cover (3) from the front seat belt turning loop (1) and disengage the tab (2) on the lower edge of the cover to
access the turning loop screw.
6. Remove the screw (4) that secures the seat belt turning loop (5) to the height adjuster (2) on the upper B-pillar.
7. Remove the seat belt turning loop from the height adjuster.
8. Remove the upper trim (1) from the inside of the B-pillar. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar
Trim/B-Pillar Trim Panel-Removal.
