Durango 2WD V8-4.7L Flex Fuel (2009)
Window Track: Service and Repair
Rear Door Glass Channel - Installation
INSTALLATION
1. Install the rear glass run channel and stationary glass (1) into the door and seat fully along the door frame.
2. Install the bolt (4) and tighten to 9 Nm (80 in. lbs.).
3. Install the door glass as necessary except for the inner belt molding. See: Window Glass/Rear Door Window Glass/Service and Repair/Rear Door
Glass - Installation
4. Install the front glass run channel and install the bolt and nut (3).
5. Tighten the bolt and nut (3) to 9 Nm (80 in. lbs.).
6. Install the inner belt molding and install the watershield. See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service
and Repair/Water Shield - Installation.
