Durango 2WD V8-4.7L VIN N (2001)
Wheel Cylinder: Service and Repair
Removal and Installation
REMOVAL
(1) Remove wheel and tire assembly.
(2) Remove brake drum.
(3) Disconnect wheel cylinder brake line.
(4) Remove brake shoe return springs and move shoes out of engagement with cylinder push rods.
(5) Remove cylinder attaching bolts and remove cylinder from support plate.
INSTALLATION
(1) Apply bead of silicone sealer around the cylinder mounting surface of the support plate.
(2) Install the cylinder mounting bolts and tighten to 20 Nm (15 ft. lbs.).
(3) Connect the brake line to the cylinder.
(4) Install the brake shoe return spring.
(5) Install the brake drum.
(6) Install the wheel and tire assembly.
(7) Bleed the base brake system.
