dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Radiator Cap - Correct Installation|Page 1805 > < Radiator|Removal and Installation|Page 1800
Page 1
background image

Radiator Cap: Technical Service Bulletins
Radiator Cap - Correct Installation

NUMBER: 07-001-01

GROUP: Cooling

DATE: Feb. 23, 2001

SUBJECT:
Radiator Cap Installation

MODELS:
2001

(AN)

Dakota

2001

(DN)

Durango

DISCUSSION:

The radiator cap can be installed on the filler neck incorrectly when servicing the cooling system. The radiator cap lock tab may ride up on the filler neck
radiator cap raised retention lip if the cap is not installed carefully causing the cap to not be fully seated (Fig. 1). A radiator cap that is not fully seated
could cause a loss of coolant and reduce the cooling system performance.

CAUTION:

WHEN INSTALLING THE RADIATOR CAP ON SUBJECT MODEL VEHICLES, MAKE SURE THE CAP IS INSTALLED SO THAT THE
RADIATOR CAP LOCKS INTO PLACE BELOW BOTH FILLER NECK RADIATOR CAP RAISED RETENTION LIPS (FIGURE 2).

NOTE:

DO NOT REMOVE THE RADIATOR CAP FOR ROUTINE COOLANT LEVEL INSPECTIONS. THE COOLANT LEVEL CAN BE CHECKED

Radiator Cap - Correct Installation|Page 1805 > < Radiator|Removal and Installation|Page 1800