Durango 2WD V8-4.7L VIN N (2001)
Evaporator Core: Service and Repair
Front A/C Evaporator
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the heater-A/C housing from the vehicle, and remove the housing cover. Refer to: Heating and Air Conditioning, Housing Assembly
HVAC, Service and Repair, Front, Front HVAC Unit Removal and Installation, See: Housing Assembly HVAC/Service and Repair/Removal
and Replacement/Front HVAC Housing Removal and Installation
3. Lift the front evaporator coil out of the heater- A/C housing.
INSTALLATION
1. Insert the front evaporator coil into the bottom of the heater-A/C housing.
2. Reassemble and reinstall the heater-A/C housing in the vehicle. Refer to: Heating and Air Conditioning, Housing Assembly HVAC, Service
and Repair, Front, Front HVAC Unit Removal and Installation, See: Housing Assembly HVAC/Service and Repair/Removal and
Replacement/Front HVAC Housing Removal and Installation
NOTE: If the front evaporator coil is replaced, add 60 milliliters (2 fluid ounces) of refrigerant oil to the refrigerant system. Use only refrigerant
oil of the type recommended for the compressor in the vehicle.
3. Evacuate the refrigerant system. Refer to: Heating and Air Conditioning, Refrigerant, Service and Repair, Refrigerant - Evacuate, See:
Refrigerant/Service and Repair/Refrigerant - Evacuate
4. Charge the refrigerant system. Refer to: Heating and Air Conditioning, Refrigerant, Service and Repair, Refrigerant - Charge, See:
Refrigerant/Service and Repair/Refrigerant - Charge
5. Connect the battery negative cable.