Durango 2WD V8-4.7L VIN N (2001)
Audible Warning Device Control Module: Description and Operation
For additional information on the Central Timer Module, refer to Powertrain Management / Computers and Control Systems / Body Control Module.
See: Body and Frame/Body Control Systems/Central Timer Module
CENTRAL TIMER MODULE
The Durango (DN) utilizes a Central Timer Module (CTM). This system is available in a Base or Highline configuration.
The CTM performs most of the typical functions a Body Control Module would perform.
The Base and Highline CTM provides the following features:
-
Battery Saver Functions For Exterior and Interior Lamps
-
Cargo Lamps
-
Chime Warning
-
Courtesy Lamps
-
Dome Lamps
-
Dome Defeat
-
Door Ajar Switch Status
-
Fog Lamps
-
Head Lamp Time Delay
-
Intermittent Wiper Controls
-
Low and High Beam Head Lamps
-
Optical Horn
-
Park Lamps
Additional features of Highline CTM
-
Central Locking (VTSS)
-
Door Lock Inhibit
-
Driver Door Unlock
-
Enhanced Accident Response
-
Power Door Locks
-
Remote Radio
-
Remote Keyless Entry
-
Vehicle Theft Alarm (VTSS)
Fig. 1 Central Timer Module
The Central Timer Module is located behind the left side kick panel. It contains 26-way, 16-way and 12-way connectors.
The high-line Central Timer Module (CTM) can also control some features of the audio system when the vehicle is equipped with the optional
RAZ radio receiver and remote radio switches. A high-line CTM is used on high-line versions of this vehicle. The CTM combines the functions of
a chime/buzzer module, an intermittent wipe module, an illuminated entry module, a remote keyless entry module, and a vehicle theft security