Durango 2WD V8-5.2L VIN Y (1999)
Trunk / Liftgate Striker: Service and Repair
LATCH STRIKER
REMOVAL
1. Remove liftgate trim scuff pad.
Fig. 4
2. Remove screws attaching liftgate striker to floor pan (Fig. 4).
3. Separate striker from vehicle.
INSTALLATION
1. Position striker on vehicle.
2. Install screws attaching liftgate striker to floor pan (Fig. 4) and tighten to 27.8 N.m (20.5 ft.lbs.).
3. Install liftgate trim scuff pad.