Durango 2WD V8-5.2L VIN Y (1999)
Vehicle Speed Sensor: Locations
Vehicle speed and distance covered are measured by the Rear Wheel Speed Sensor. The sensor is mounted to the rear axle. A signal is sent from this
sensor to the Controller Antilock Brake (CAB) computer. A signal is then sent from the CAB to the Powertrain Control Module (PCM) to determine
vehicle speed and distance covered. The PCM will then determine strategies for speed control system operation.
For the location of the transmission output shaft sensor, please refer to Transmission Speed Sensor/Locations. See: Transmission Control
Systems/Sensors and Switches - Transmission and Drivetrain/Sensors and Switches - A/T/Transmission Speed Sensor
For the location of the rear wheel speed sensor, please refer to Brakes and Traction Control/Brakes/Antilock Brake System/Wheel Speed
Sensor/Locations. See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Wheel Speed Sensor