Durango 2WD V8-5.2L VIN Y (1999)
airbag module and/or the new instrument panel top cover when installing the passenger side airbag module.
2. Secure the passenger side airbag module upper mounting bracket to the upper airbag door flange and bracket with four rivets.
3. Remove the masking tape applied to the passenger side airbag module vents during the removal procedures.
4. install the instrument panel top cover and the passenger side airbag module onto the instrument panel as a unit. Refer to Instrument Panel Top
Cover Replacement of Instrument Panel Systems for the procedures.
5. Be certain that the passenger side airbag module wire harness connector is fully engaged with and latched to the instrument panel wire harness
connector.
6. Do not reconnect the battery negative cable at this time. Refer to Airbag System in the Diagnosis and Testing for the proper procedures.