Durango 2WD V8-5.2L VIN Y (1999)
8. Remove limit valve housing. Then remove retainer, spring, limit valve, and 2-3 throttle plug from limit valve housing (Fig. 66).
9. Remove 1-2 shift control valve and spring.
10. Remove 1-2 shift valve and spring.
11. Remove 2-3 shift valve and spring from valve body.
12. Remove pressure plug cover.
13. Remove line pressure plug, sleeve, throttle pressure plug and spring.
VALVE BODY LOWER HOUSING
1. Remove timing valve cover.
2. Remove 3-4 timing valve and spring.
3. Remove 3-4 quick fill valve, spring and plug.
4. Remove 3-4 shift valve and spring.
Fig. 67
5. Remove converter clutch valve, spring and plug (Fig. 67).
6. Remove converter clutch timing valve, retainer and valve spring.
3-4 ACCUMULATOR HOUSING
1. Remove end plate from housing.
2. Remove piston spring.
