Durango 2WD V8-5.7L Hybrid (2009)
Antenna, Navigation: Service and Repair
Navigation Radio Antenna - Installation
INSTALLATION
WARNING: To avoid serious or fatal injury on vehicles equipped with airbags, disable the Supplemental Restraint System (SRS) before
attempting any steering wheel, steering column, airbag, seat belt tensioner, impact sensor, or instrument panel component
diagnosis or service. Disconnect and isolate the battery negative (ground) cable, then wait two minutes for the system capacitor to
discharge before performing further diagnosis or service. This is the only sure way to disable the SRS. Failure to take the proper
precautions could result in accidental airbag deployment.
1. Position antenna to instrument panel.
2. Connect antenna to radio.
3. Install radio See: Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Removal and Replacement/Radio - Installation.
4. Install and tighten mounting fasteners.
5. Install instrument panel defroster grille See: Heating and Air Conditioning/Air Register/Service and Repair/Defroster Grille - Installation.
6. Install passenger airbag See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Passenger Air Bag -
Installation.
7. Connect battery negative cable.
