Durango 2WD V8-5.7L Hybrid (2009)
1. Disconnect and isolate the battery negative cable.
2. Remove the affected seat with the inoperative motor (3) See: Service and Repair/Seat, Front/Seat - Removal.
3. Remove the seat cushion and pan See: Seat Cover/Service and Repair/Seat Cushion Cover - Removal.
4. Disconnect the motor electrical connector.
5. Remove the fasteners (1) holding the motor (3) to the seat adjuster (2).
6. Remove screw and washer from the motor shaft.
7. Remove motor (3) from seat adjuster (2).
