Durango 2WD V8-5.7L Hybrid (2009)
16. Remove and discard the brake lamp switch. See: Lighting and Horns/Brake Light Switch/Service and Repair/Stop Lamp Switch - Removal.
17. Remove the brake booster rod to brake pedal retainer clip (3) and spacer (2). Discard the retainer clip.
NOTE: Verify the positioning of the brake booster rod (1) for proper installation. The pad (4) must be positioned so that the spacer (2) can
contact the pad (4) when the brakes are applied.
18. Reposition the brake booster rod (1) away from the brake pedal shaft.
19. Remove the three brake booster mounting nuts (1).
20. Remove the booster (2) from the front cowl panel. It may be necessary to have an assistant in the vehicle to pull the booster rod extension toward
the center of the vehicle away from the brake pedal.
