Durango 2WD V8-5.7L Hybrid (2009)
NOTE: Illustration shown with rear heater-A/C housing retaining bolts removed for clarity.
NOTE: The three rear heater-A/C housing retaining bolts have a retaining washer to keep them attached to the rear housing. It is not
necessary to completely remove the retaining bolts from the rear housing to remove the housing from the vehicle.
14. Completely loosen the three bolts (1) that secure the rear heater-A/C housing (2) to the rear interior quarter panel (3).
15. Remove the rear heater-A/C housing from the vehicle.
Rear HVAC Housing Installation
INSTALLATION
1. Position the rear heater-A/C housing (2) into the vehicle.
2. Install the three bolts (1) that secure the rear heater-A/C housing to the rear interior quarter panel (3). Tighten the bolts to 3 Nm (26 in. lbs.).