Durango 2WD V8-5.7L Hybrid (2009)
10. Install the blower motor (2) to the HVAC housing (3) .
11. Connect the HVAC wire harness (1) to the blower motor.
12. Carefully install the heater core (6) into the top of the HVAC housing (3). Make sure that the heater core insulator is properly positioned.
13. Install the two screws (4) that secure the heater core retaining bracket (5) to the HVAC housing. Tighten the screws to 2.2 Nm (20 in. lbs.).
14. Install the HVAC housing bracket (2) to the top of HVAC housing.
15. Install the two screws (1) that secure the HVAC housing bracket to the HVAC housing. Tighten the screws to 2.2 Nm (20 in. lbs.).
16. Install the heater core tube retaining bracket (4) to the top of the HVAC housing (2).
17. Install the screw (3) that secures the heater core tube retaining bracket to the HVAC housing. Tighten the screw to 2.2 Nm (20 in. lbs.).
